Home    Services    Accreditations    Contacts    Find Us    Info    News

Titolo: IntekLogo

 

ElettroMagnetic Compatibility Sector (EMC)


The EMC sector is able to provide normative advice and carry out laboratory tests for many categories of equipment in accordance with Directive 2014/30/EU and the EMC basic standards.

INTEK staff participates in the CEI technical committees in the EMC field and can therefore provide information on changes in the standards and can help customers in the selection of product standards more appropriate to be applied.

image010.jpg

The laboratory has a fully anechoic room (FAR) built by SIDT for 3 m measurements and a shielded room built by Siemens + Matsushita for emission measurements of conducted electromagnetic interference and power disturbances.

The anechoic room is also equipped with a suction system for exhaust gas for testing equipment with a combustion engine; instead the screen room has an internal temperature control system for tests on air conditioners.

 

image012.jpg image013.jpg image015.jpg

Detail of available tests

 

 

Product

Name of the test

Reference standard

Home and Building Electronic Systems (HBES)

Part 2-2: System overview - General technical requirements

(electromagnetic compatibility §7)

EN 50090-2-2

Railway applications -

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

EN 50121-3-2

Railway application,, signalling and telecommunication apparatus

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

EN 50121-4

Alarm Systems intended for use in and around residential buildings, commercial, light industrial and industrial

Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm.

EN 50130-4

Railway application, equipment

Railway applications - Electronic equipment used on rolling stock

EN 50155

Measuring relays and protection equipment

Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment

EN 50263

Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

EN 50270

Traffic lights

Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment

EN 50293

Household and similar electrical appliances

Household and similar electrical appliances - Electromagnetic fields - Methods for evaluation and measurement

EN 50366

Machine tools

Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1:

EN 50370-1

Machine tools

Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity

EN 50370-2

Switches and related accessories for use in home and building electronic systems (HBES))

Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) (Electromagnetic compatibility §26)

EN 50428

Electrical/electronic equipment

Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment

EN 55011

Household appliances, electric tools and similar apparatus, that uses electricity, electric toys and electric tools

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission - Product family standard

EN 55014-1

Household appliances, electric tools and similar apparatus, that uses electricity, electric toys and electric tools

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission - Product family standard – Measurement of conducted emission (30 - 300MHz)

EN 55014-1

Household appliances, electric tools and similar apparatus, that uses electricity, electric toys and electric tools

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

EN 55014-2

Lighting equipment and similar

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN 55015

CISPR 15

Equipment for information technology (ITE)

Limits and methods of measurement of radio disturbance characteristics of information technology equipment

EN 55022

CISPR 22

Equipment for information technology (ITE)

Information technology equipment - Immunity characteristics - Limits and methods of measurement

EN 55024
 
CISPR 24

Electrical unit / Electronics for automotive applications

Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Conducted emissions § 6.2 voltage measurement.

EN 55025
 
CISPR 25

Multimedia equipment

Electromagnetic compatibility of multimedia equipment - Emission requirements

EN 55032
 
CISPR 32

Audio, video, audio-visual and entertainment lighting control apparatus for professional use

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission

EN 55103-1

Audio, video, audio-visual and entertainment lighting control apparatus for professional use

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity

EN 55103-2

LV switchboards

Low-voltage switchgear and controlgear assemblies - Part 1: General rules - (Electromagnetic Compatibility)

EN 61439-1

Medical electrical equipment

Medical electrical equipment - Part 1: General requirements for safety - 2. Collateral standard: Electromagnetic compatibility - Requirements and tests

EN 60601-1-2

Electronic switches

Switches for household and similar fixed-electrical installations - Part 2: Particular requirements - Section 1: Electronic switches - (Electromagnetic Compatibility §26)

EN 60669-2-1

Electronic switches

RCS

Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 2: Electromagnetic remote-control switches (RCS) -  (Electromagnetic Compatibility §26)

EN 60669-2-2

Electronic switches

TDS

Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 3: Time-delay switches (TDS)

(Electromagnetic Compatibility §26)

EN 60669-2-3

Automatic electrical controls

Automatic electrical controls for household and similar use - Part 1: General requirements (Electromagnetic compatibility 23, 26 and annex H23 and H26)

EN 60730-1

Automatic electrical controls

thermal motor protectors

Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors

EN 60730-2-2

Automatic electrical controls thermal motor protectors for motor-compressors

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-4

Automatic electrical controls for burners

Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical burner control systems (Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-5

Automatic electrical pressure sensing controls

Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements  (Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-6

Automatic electrical

timers

Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-7

Automatic electrical

water valves

Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated water valves, including mechanical requirements

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-8

Automatic electrical temperature sensing controls

Automatic electrical controls for household and similar use - Part 2: Particular requirements for temperature sensing controls

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-9

Automatic electrical

motor starting relays

Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor starting relays

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-10

Automatic electrical energy regulators

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-11

Electrical

door locks

Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks (Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-12

Automatic electrical humidity sensing controls

Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-13

Automatic electrical actuators

Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-14

Automatic electrical controls

Automatic electrical controls for household and similar use - Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-16

Automatic electrical flow sensing controls

Automatic electrical controls for household and similar use - Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements

(Electromagnetic compatibility §23 and 26  and annex H23 and H26)

EN 60730-2-18

Marine navigational and radio communication equipment

Marine navigational equipment - General requirements - Methods of testing and required test

(Electromagnetic compatibility  §9 and 10)

EN 60945

Low-voltage switchgear and controlgear

Low-voltage switchgear and controlgear - Part 1: General rules

(Electromagnetic compatibility §7.3)

EN 60947-1

Circuit breakers

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

(Electromagnetic compatibility §7.3)

EN 60947-2

Switches, disconnectors, switch-disconnectors and fuse-combination units

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units  (Electromagnetic compatibility §7.3)

EN 60947-3

Electromechanical contactors and motor-starters

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

(Electromagnetic compatibility  §8.3)

EN 60947-4-1

A.C. semiconductor motor controllers and starters

Low-voltage switchgear and controlgear - Part 4: Contactors and motor-starters - Section 2: A.C. semiconductor motor controllers and starters

(Electromagnetic compatibility §8.3)

EN 60947-4-2

Semiconductor controllers and contactors for non-motor loads

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

(Electromagnetic compatibility §8.3)

EN 60947-4-3

Control circuit devices and switching elements - Electromechanical control circuit devices

Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 1: Electromechanical control circuit

(Electromagnetic compatibility §7.3)

EN 60947-5-1

Control circuit devices and switching elements -Proximity switches

Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 2: Proximity switches - (Electromagnetic compatibility paragraphs 7.2.6, 7.2.7 and  8.6)

EN 60947-5-2

Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

(Electromagnetic compatibility paragraphs  7.2.1.1 and 8.6)

EN 60947-5-3

Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)  (Electromagnetic compatibility paragraphs  7.4 and 9.4)

EN 60947-5-6

Control circuit devices and switching elements - Requirements for proximity devices with analogue output

Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output

(Electromagnetic compatibility §8.6)

EN 60947-5-7

Automatic transfer switching equipment

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Automatic transfer switching equipment - (Electromagnetic compatibility paragraphs 8.3 and 9.5)

EN 60947-6-1

Control and protective switching devices (or equipment) (CPS)

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

(Electromagnetic compatibility §8.3)

EN 60947-6-2

Control units for built-in thermal protection (PTC) for rotating electrical machines

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical

(Electromagnetic compatibility §8.3 and 9.4)

EN 60947-8

Arc welding equipment

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

EN 60974-10

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

EN 61000-3-2

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

EN 61000-3-3

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test.

EN 61000-4-10

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (0 - 100 % Ut)

EN 61000-4-11

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Oscillatory waves immunity test

EN 61000-4-12

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

EN 61000-4-14

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

EN 61000-4-16

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

EN 61000-4-17

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

EN 61000-4-18

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

EN 61000-4-2

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

EN 61000-4-28

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

EN 61000-4-29

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

EN 61000-4-3

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

EN 61000-4-4

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

EN 61000-4-5

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

EN 61000-4-6

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

EN 61000-4-8

Electrical and electronic equipment

Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test

EN 61000-4-9

Electrical and electronic equipment for household, commercial and light-industrial environments

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

EN 61000-6-1

Electrical and electronic equipment for industrial environments

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

EN 61000-6-2

Electrical and electronic equipment for household, commercial and light-industrial environments

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

EN 61000-6-3

Electrical and electronic equipment for industrial environments

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial

EN 61000-6-4

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses

Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules

Electromagnetic compatibility annex paragraph E

EN 61008-1

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses

Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules

Electromagnetic compatibility annex paragraph H

EN 61009-1

Programmable controllers

Programmable controllers - Part 2: Equipment requirements and tests

EN 61131-2

Low voltage power supplies, d.c. output

Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)

EN 61204-3

Electrical equipment for measurement, control and laboratory use

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

EN 61326-1

Residual current-operated protective devices (RCDs) for household and similar use

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

EN 61543

Equipment for general lighting purposes

Equipment for general lighting purposes - EMC immunity requirements

EN 61547

Adjustable speed electrical power drive systems

Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods

EN 61800-3

 

Back to page   Services


¨  Home page  ¨